Image Raspbian full if you want a desktop, else lite is sufficient for CLI.
sudo apt-get update
sudo apt-get upgrade
sudo apt-get remove ...
Something I bought in 2015, 2 Kedei 2 lcd 3.5 inch touch screens. Worked, albeit slow.
With a Wheezy image, ...
1. Finding the VID and PID of your USB SSD
Disconnect the USB SSD. In a terminal window, run the command ...
Trouble like me with Mouse double click speed?
Google "lxde double click speed", there is a hidden file named ".gtkrc-2.0" in ...
rpi_hal from https://github.com/rudiratlos/rpi-hal is an incredible rich and uptodate unit for Freepascal to use the I/O of the Raspberry.
From Freepascal ...
Install Arduino on Buster
Arduino 1.8.12 (or higher) from arduino.cc - Software - Arduino ARM 32 bits
Download to e.g. ...
setup your system to auto ;login into a commandline session
[use sudo raspi-config]
then at the end of .bashrc put in
Shutdown menu not working:
You can get the Buttons working, just change the line ‘Logout=lxde-pi-shutdown-helper’ to ‘Logout=sudo lxde-pi-shutdown-helper’
For Buster see here!
Installed using instructions from several posts by Thaddy as follows:
1. Add stretch-backports to sources.list
Create: sudo nano /etc/apt/sources.list.d/backports.list
Add: deb http://ftp.debian.org/debian stretch-backports ...
he simplest way to set up a "pushbutton to shut down" is to add "dtoverlay=gpio-shutdown" to /boot/config.txt and rig a ...
Measure air quality
A page and news blog about Raspberry Pi, Freepascal and Lazarosn on the Pi, Ulitbo on the Pi, Arduino and ESP8266. More of a personal logbook for my own usage, it may be of use for others.