On a new build of RaspBian 2017-09-07-raspbian-stretch.zip
sudo apt-get install libgtk2.0-dev libcairo2-dev libpango1.0-dev libgdk-pixbuf2.0-dev libatk1.0-dev libghc-x11-dev
sudo apt-get install binutils-arm-none-eabi
sudo apt-get install gcc-arm-none-eabi
dpkg -l | wc
1403 14260 197899
Edit the CONF_SWAPSIZE value to be 1000 or greater
./ultiboinstaller.sh
On Ubutu 16.04
The following 2 cmds
cd ultibo/core
./startlazarus
Related posts:
Monitors, HDMI and config.txt
After writing about little touchscreens for the Raspberry Pi (TinyLCD, AliExpress LCD), the official Raspberry Pi Touchs...
After writing about little touchscreens for the Raspberry Pi (TinyLCD, AliExpress LCD), the official Raspberry Pi Touchs...
Raspberrry Pi 400, first steps
First steps with the Raspberry Pi 400, first impressions November 2, 2020. My birthday! Early, checking twitter. Eben ...
First steps with the Raspberry Pi 400, first impressions November 2, 2020. My birthday! Early, checking twitter. Eben ...
Experimenting with the Pi
An overview of the breadboard based experimenters boards and deplyment PCBs for the Pi.
An overview of the breadboard based experimenters boards and deplyment PCBs for the Pi.
Raspberry Pi Camera Module
The Raspberry Camera Module is a giant success. Flexible, high quality, well supported. I have shown you already tow pos...
The Raspberry Camera Module is a giant success. Flexible, high quality, well supported. I have shown you already tow pos...